How To Extend 1-2 Ton Per Hour Small Poultry Chicken Feed Pellet Mill Machine Service Life For Chick

2020-09-07后退to List

当你买了一个1-2 ton per hour small poultry chicken pellet mill machine for chicken poultry farm或者1-2t / h小chicken poultry feed production line，你应该注意的是如何尽可能长时间使用它，因为这是削减你的最好的方法鸡饲料生产线cost to the lowest. As a matter of fact, the most important for lengthening chicken feed pellet making machine's service life is to properly maintain it.

The maintenance ofsmall szlh 250 chicken pellet millfor鸡饲料生产植物

1. Before using it, read the Instruction Manual carefully. This step can help you be familiar with the performance, structure, utilization and maintenance method of the small simple operating manual chicken poultry feed pellet mill machine.

2. Test run before using the1-2 ton small chicken pellet making machine for chicken farm。Before starting the small poultry feed processing machine, check if all the screws are tight. Then start it for test run to see if its rotating direction is in accordance with identified and if there is abnormal noise.

3. Adjust the clearance between the roller and die of小1-2tph自制简单饲料颗粒机用于食物。确保它们的间隙约为0.2mm至0.3mm，这意味着滚筒和模具不互相接触。

4. Before using the1-2t / h鸡饲料的动物颗粒机, grind it for several times with some mixed material of feed raw material, fine sand and engine oil with the proportion of 1:2:1 until the die holes are smooth to extrude pellets.

5. Machine halt. In the beginning, stop feeding powder before stop the鸡肉颗粒机1-2每小时1-2吨直到储存箱内的材料完成造粒，并将油性混合物材料加入小鸡饲料颗粒磨机制造机械研磨机，直到它被压入孔中。这可以防止下次阻塞。

6. Pellet mill die maintenance. Under normal chicken feed production, the roller bearing should be cleaned by gasoline or diesel oil once every 30 days and add heat resistant lubrication oil.

7.颗粒长度控制。鸡饲料颗粒的长度由颗粒切割器的延伸长度控制。

8.齿轮的维护。前6个月更换新机器中的齿轮油。然后每年保持一半。

延长寿命的小型农场家禽鸡饲料颗粒制造机，良好的维护就像皮肤护理给女性。因此，每小时维持1-2吨小家禽鸡饲料颗粒加工机当时让它使用它甚至比你预期的时间长。