High performance 2 ton per hour agriculture waste biomass pellet making machine for 6-10mm pellets

2020-12-03Back to List

1.Richi.2 ton per hour new technolgoy agriculture waste biomass wood pellet making machine for 6-10mm pellets

It is necessary for people to get green fuel in winter for heating in winter. Owning a2 ton per hour capacity ring die biomass agricultural waste pellet mill for 6-10mm pelletsis an ideal idea for people to make own biomass pellets fuel. It can help us save more expense and energy and make us have a warmer and greener winter.

(1)Parameters

Type:MZLH ring die ce agriculture waste biomass wood pellet mill machine with eletic Engine

力量：160kW

Output:2-2.5 ton per hour

Weight:4500kg

Packing size:3000*1260*1860

(2)2T/H high performance agriculture waste biomass pellet mill price

China 2 ton per hour stable performance industrial biomass wood pellet machine for agriculture wasteis usually between 40000USD-50000USD.

2TPH factory price agricultural waste pellet making machine for 6-10mm pelletsis widely applied for making biomass pellets. While the biomass pellets are a useful kind of smokeless fuel which is as efficient as conventional energy source. The biomass material covers a wide scope from most common garbage or useless agro-wastes in our daily life: straw, sawdust, wood shavings, leaves, grass and some other agro and forestry wastes. When these biomass wastes are made pellets which can discharge high calorific value with less smoke. Therefore, we can heat or cook efficiently and cleanly.

Biomass agricultural waste pellet making machine for 6-10mm fuel pelletscreated by RICHI is your ideal choice to handle agro-wastes in the farm. With a competitive price and excellent function, our products are available for common families. Our2 ton capacity factory offered new agricultural waste wood pellet press machines for 6-10mm pelletsequip with advanced technology and high quality to make the2t/h long lifetime agricultural waste pellet mill machinework better.

2.Analysis of the reasons why the bearings ofagriculture waste biomass wood pellet mill machinealways burn out

Many customers have reported to us that they have boughtagriculture waste sawdust pelletizer mahcinesfrom other manufacturers, but the bearings always burn out. In RICHI's opinion, this problem is completely avoidable. If the bearings of the agriculture waste pelletizing machines they bought were of first-class brands such as SKF, the quality would be guaranteed.

（1）当biomass wood agriculture waste pellet press machine manufacturerselects the bearing, the power and torque do not match the bearing capacity. In order to reduce the cost, low-quality or small-size bearings are selected.

(2) Bearing quality is a problem.

Folding, inclusions and other defects during forging, cracks or strong internal stress generated by heat treatment, grinding cracks, turning cracks, etc. may all be the cause of the final fracture. Bearing fracture depends on the working environment of the bearing and the quality of the bearing itself. Problems, excessive load, lack of lubrication, can cause bearing fatigue.

The solution is to check the working condition of the bearing regularly, and do not lack lubrication. If the bearing is found to be defective, replace it in time to avoid damage to the machinery and equipment. The greater loss is mainly due to the quality of the bearing and the improper use of the bearing.

(3) The bearing material is poor, or the bearing has high hardness in the fire, it is easy to break.

(4) The bearing installation is not concentric, the speed is too high, heating and oil shortage, bearing load, bearing fatigue, bearing is also easy to damage.

(5) Lubrication of the bearings of theagriculture waste pellet making machine for 6-10mm biomass pelletsis not timely. Due to human inertia and weak sense of responsibility, the on-site staff were unable to check the oil level of the automatic lubrication pump in time, resulting in no oil level.

要查看事故现场的综合分析，滚动轴承一般使用GCR15轴承钢，所用结构是隐藏针马氏体，硬度极高（约HRC62〜65）。一次性骨折通常是所谓的瓷骨折。由于其微观结构，高强度和优异的韧性，该部分是平坦的瓷器状。显微镜，它是所谓的准切割加脆弱斑块形态，横截面变形非常小，这就是为什么你看到的骨折非常平坦。由于缺口敏感极高，一般疲劳骨折传播速度非常快。在宏观视图上，疲劳骨折仍然是一个单次特征，除了源区附近有时的微弱疲劳电弧特征。换句话说，你仍然觉得骨折非常平坦。

[相关信息]

1.How much does a wood pellet making machine cost

2.2TPH木颗粒生产线设计