How To Use Small Poultry Chicken Feed Pellet Mill Machine

2020-08-08返回目录

How to use the small poultry chicken feed pellet mill machine？The economical每小时1吨戒指模具鸡饲料颗粒磨机，专为专业设计鸡饲料线, is a new product researched, developed and launched by our excellent technical team through drawing up reasonable suggestions and following up users site for several years. This chicken feed pellet machine is featured with scientific and reasonable structure and design, easy operation, high output, low consumption, high forming ratio, suitable for processing corn, bean pulp, straw, grass, peanut shell etc.

小鸡家禽饲料机（1T / H戒指管饲料轧机机）

This type家禽鸡饲料颗粒制造机设计开发与技术pract吗ices from our technicians combined with the feedback opinions from plenty of clients under the base of the traditional ring die pellet milling machine. Since we put this type poultry feed mill machine in the market, majority of clients respond well(Best Cost for Investment of Small Poultry Chicken Feed Pellet Processing Machine>>). However, there are still some clients say that the output is low, it will be covered, the component is easy to damage etc. So, why do these problems occur? Improper operation causes those problems. Properly operating the feed pellet machine can not only increase its output, but also improving its lifetime.

How to operate鸡家禽饲料机还

1.良好地控制进入的原材料。

2.Moisture内容：水分的要求取决于不同种类的原料。原料的水分含量指定为10％-18％。材料应均匀混合。

3.Requested Size: The maximum size of the materials cannot exceed the diameter of the pelletizing hole. For example, if the diameter of the hole is 6mm, the length of the raw material cannot be more than 6mm. Please ensure the proper size of raw material according to the diameter of the hole.

4.Composition: This chicken feed pellet mill can process both single kind material and mixture with different materials. Pieces of stone and iron or other hard impurities cannot be mixed into the material; otherwise they will damage the die and roller.

5.适用：我们的工厂设计用于造粒而没有任何添加剂粘合剂。

6.New poultry feed mill machine needs running-in for the first time use.

你收到的死亡从未被使用过。因此，您需要在磨坊中研磨。请在第一次操作之前研磨。油性混合物成分：将20％细砂，65％的生物质材料（锯末）和15％废物发动机油混合。总重量可以是进料容量的10％。

新的家禽饲料轧机机需要首次使用运行。

7.Die grinding-in procedures

①放电出口下的铲斗。可以将收集的材料放回颗粒磨料以预热鸡家禽饲料颗粒磨机。

②打赌。

③Input suitable amount of oily mixture into the mill.

④Continue to pour oily mixture in and let it run through pelletizing holes.

⑤使用油性混合物以回收方式30-40分钟。

8.Pelletizing.

①预热后，物料并运行鸡饲料厂。

②Material with low moisture content may results in producing soft or powdery pellets; Material with high moisture content may leads to producing rough pellets.

③如果不能产生颗粒，则拧入或拧紧两侧的调节螺栓。

④You may need to test several times on different materials or different moisture content to reach the best pellet quality.

如果调整后仍然不起作用，请与我们联系。

Richi.is one large动物鸡饲料颗粒磨机制造商在饲料加工设备的投入,integrating the design, manufacturing, installation, mainly produce all sorts of feed pellet machines, crushing machine, mixing machine, lifting machine, cooling machine,etc and the complete feed pellet production line machinery. About more chicken feed processing machines details, please Email: enquiry@cn-pellet.com,Whatsapp/Cel: +86 185 7410 3366.